100mm Hand Monitor , Monitor > 100 Hand Monitor & Spares ,
100mm nozzle
A stationary pressure jet supported by a baseplate with holding down bolts, which can be articulated through horizontal and vertical arces. This enables pressurised water at high velocity to washdown and slurrify resides, effluent, or other retained media from surfaces, such as tankers used for transporting waste.
These monitors are also used in mineral extraction duties where the process calls for the kinetic energy of a water jet to breakdown and slurrify minerals, most typical in the English China Clay extractive industries.
The associated pumps will depend on the nozzle size and pressure required, which typically for this equipment is up to 200 cu metres/hr at 6-10 bar.
The quality of a water jet in air deteriorates rapidly beyond distance of 100 x nozzle diameter, so the monitor should be positioned reasonably close to the work, to ensure washing efficiency.
Great emphasis is placed on Operator Safety both in terms of the water jet, and expecially if there are any entrained debris which can ricochet or bounce back out of the danger zone.
Manufactured by: